Friday, November 6, 2009

How to save and transfer files with the Gypsy...

FYI...

Latest info from Provocraft:

File Transfer Steps (PC):
1) Turn on your Gypsy
2) Plug it into your PC
3) Launch Gypsy Sync
4) After checking for updates you will see two windows and two button
5) In the folder window, click on the “+” symbol next to the word Gypsy
6) Click on Designs – this will display all the designs that are currently on your Gypsy in the file window on the right
7) To transfer these files to your PC
a. Select a file(s) and click the button at the bottom of the screen that says “Save Selected File(s) to PC”
8) To transfer files to your Gypsy
a. Click the button that says “Upload File(s) to Gypsy”

File Transfer Steps (MAC):
1) Turn on your Gypsy
2) Plug it into your PC
3) Launch Gypsy Sync
4) After checking for updates you will see a file list window
5) To transfer these files to your MAC
a. Select a file(s) and drag them to the desktop
6) To transfer files to your Gypsy
a. Select the file(s) on your MAC and drag them to the file list window

File Transfer notes:
1) When transferring files to and from the Gypsy the names of the files should only contain the following characters A-Z 0-9 . , - _ . You should also avoid file names that are over 64 characters in length.
2) The Gypsy can be on any screen when transferring files but it is recommended that you are on the Welcome screen when transferring files to avoid problems.

Steps for Converting Files:
*.gypsy to *.cut
1) Open the *.gypsy file using a licensed copy of CDS
2) Click File
3) Click Save as
4) Change the file type to *.cut
5) Change the file name
6) Click Save

*.cut to *.gypsy
1) Open the *.cut file using a licensed copy of CDS
2) Click File
3) Click Save as
4) Change the file type to *.gypsy
5) Change the file name
6) Click Save

File Conversion Notes:
1) Any *.cut file that is converted to a *.gypsy file that contains images that have been slanted/skewed will not cut properly on the Gypsy.
2) Any *.gypsy file that has multiple layers that is transferred to a PC and opened in CSD will have all the layers combined into a single layer.



Share/Save/BookmarkAdd to Technorati Favorites

3 comments:

  1. Thanks for sharing this :-)

    ReplyDelete
  2. I don't see two windows or two buttons, no + either.
    I have 700 files to back up and it doesn't like it...

    ReplyDelete
  3. Question, if accidently cancel an original size of a doll in paper doll. How do you figure the size oit to make clothes.

    ReplyDelete

Thanks so much for commenting! I love to hear from you!

Note: Only a member of this blog may post a comment.

Copyright

Unless otherwise stated within the post, this is my original work. Please feel free to use as inspiration for your own personal use, but do not use for publication, contest/message board entries, or to sell. If my work inspires a work of your own, please give credit by posting a link to my blog. Thank you! MyFreeCopyright.com Registered & Protected